Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into a brown-red design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD). The integrated air circuit with 90° air deflection enables installation in a corner without air ducts or wall installation with air ducts on the air outlet side. High coefficients of performance (COP) thanks to compliance with EN 14511 for larger volume flows on the heat consumption side, optimised high-performance evaporator for heating operation and dual differential pressureless manifold for reducing pump operating time. Sound-optimised through low-noise fan and insulated metal casing; integrated solid-borne sound insulation for direct connection to the heating system with free-swinging compressor base plate.
Compact design with optional domestic hot water preparation and integrated components for direct connection of an unmixed heating circuit (must not be used for bivalent systems):

• Circulating pump (observe the free compression)

• Expansion vessel (24 l)

120 l buffer tank (can be dismantled) with integrated switchable supplementary heating 3/6 kW, safety module. Soft starter, integrated flow and return sensors; external sensor (standard NTC-2) included in the scope of supply. A heat circulating pump not included in the scope of supply is required for the distribution system.

Information on leak tests and refrigerant quantities can be found here.