Dimplex / Products / Heat pumps / Air-to-Water /
|
LA 6TU |
The new LA 6TU high-efficiency air-to-water heat pump stands out thanks to its high coefficients of performance (COPs), even at low heat outputs. This makes it perfect for low-energy houses. High performance factors are achieved with an electronically controlled expansion valve and a slow-running owl's wing EC fan - and high performance factors translate into low operating costs. The special casing design makes installation close to walls possible, thus saving space in the garden. The heat pump can be combined with a hydro tower with an integrated domestic hot water cylinder for quick and easy installation.
The benefits at a glance:
Information on leak tests and refrigerant quantities can be found here.
| High-efficiency air-to-water heat pump for installation close to walls (Low temperature) | ||
|---|---|---|
| Order reference | LA 6TU | |
| Casing colour | White aluminium (similar to RAL 9006) | |
| Max. flow temperature | 60 °C | |
| Lower operating limit heat source (heating operation) / Upper operating limit heat source (heating operation) | -20 to 35 °C | |
| Heat output with 1 compressor / COP A7/W35* | 4 kW / 2,9 | |
| Heat output 1 compressor / COP A2/W35* | 5,1 kW / 3,8 | |
| Heat output with 1 compressor / COP A7/W35* | 6,4 kW / 4,6 | |
| Heat output with 1 compressor / COP A10/W35* | 6,7 kW / 4,7 | |
| Nominal power consumption according to EN 14511 at A2/W35 | 1,3 kW | |
| Sound power level device | 58 dB (A) | |
| Sound pressure level in 10 m | 29 dB (A) | |
| Refrigerant / Amount of refrigerant | R410A / 3,4 kg | |
| Max. heating water flow rate / Pressure drop | 1,1 m³/h / 9500 Pa | |
| Heat source flow (min.) | 2700 m³/h | |
| Dimensions (W x H x D)** | 1350 x 940 x 600 mm | |
| Weight | 165 kg | |
| Connection voltage | 3/N/PE ~400 V, 50 Hz | |
| Starting current with soft starter | 27 A | |
| Fuse protection | C 16 A | |
| Type of defrosting | Reverse circulation | |
| Connection heating | 1 inch | |
| Seal of approval EHPA (valid until) | Yes / 12.12.2014 | |
*Heat output and COP according to EN 14511 at A2/W35 (A2 = air intake temp. +2 °C, W35 = heating water outlet temp. +35 °C)
**Please note that additional space is required for pipe connections, operation and maintenance.
Product data sheet with system accessories:
as PDF 
by e-mail
Instruction for use:
as PDF
Product information:
as PDF
Equipment data:
as PDF
Declaration of conformity:
as PDF