Dimplex / Products / Heat pumps / Air-to-Water
The system accessories which are available for each type of heat pump can be individually compiled in the form of a PDF file.
Order reference: LKK 500
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKL 500
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKB 500
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKK 600
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKL 600
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKB 600
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKK 700
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKL 700
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKB 700
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKK 800
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKL 800
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKB 800
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKK 900
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKL 900
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: LKB 900
Optimally suited for air-to-water heat pump air circuits; GFRC exterior; thermally insulated and sound-insulated on the inside to prevent the formation of condensate and considerably reduce sound transmission. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Minor damage to the outer surface has no effect on the efficiency and can be repaired with standard plaster.
Order reference: VSK 500
Installation hardware for sealing the cut edges, where ducts need to be cut to length. Consisting of channel-section frame (U profile) and fitting compound.
Order reference: VSK 600
Installation hardware for sealing the cut edges, where ducts need to be cut to length. Consisting of channel-section frame (U profile) and fitting compound.
Order reference: VSK 700
Installation hardware for sealing the cut edges, where ducts need to be cut to length. Consisting of channel-section frame (U profile) and fitting compound.
Order reference: VSK 800
Installation hardware for sealing the cut edges, where ducts need to be cut to length. Consisting of channel-section frame (U profile) and fitting compound.
Order reference: VSK 900
Installation hardware for sealing the cut edges, where ducts need to be cut to length. Consisting of channel-section frame (U profile) and fitting compound.
Order reference: LKB 700A
Air duct optimally suited for air circuits of air-to-water heat pumps installed indoors; plug-in system consisting of 4 GFRC side panels with thermal insulation and sound insulation on the inside to prevent the formation of condensate and considerably reduce sound transmission (sound insulation factor ~1 dB(A) per running metre). 2 adaptor bases give the air duct increased stability and allow simple assembly of the side panels. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Delivery includes multi-purpose adhesive.
Order reference: LKB 800A
Air duct optimally suited for air circuits of air-to-water heat pumps installed indoors; plug-in system consisting of 4 GFRC side panels with thermal insulation and sound insulation on the inside to prevent the formation of condensate and considerably reduce sound transmission (sound insulation factor ~1 dB(A) per running metre). 2 adaptor bases give the air duct increased stability and allow simple assembly of the side panels. The ducts must be protected against driving rain and can, if necessary, be cut to length and/or painted with waterproof emulsion paint on site. Delivery includes multi-purpose adhesive.
Order reference: DMK 500-1
Circumferential rubber gasket for vibration-free connection of the air duct to the air intake and air outlet side of the heat pump. The component is attached via a screwed fastening frame (packaging unit 1).
Order reference: DMK 600-1
Circumferential rubber gasket for vibration-free connection of the air duct to the air intake and air outlet side of the heat pump. The component is attached via a screwed fastening frame (packaging unit 1).
Order reference: DMK 600
Circumferential rubber gasket for vibration-free connection of the air duct to the air intake and air outlet side of the heat pump. The component is attached via screwed fastening frames.
Order reference: DMK 700-1
Circumferential rubber gasket for vibration-free connection of the air duct to the air intake and air outlet side of the heat pump. The component is attached via a screwed fastening frame (packaging unit 1).
Order reference: DMK 700
Circumferential rubber gasket for vibration-free connection of the air duct to the air intake and air outlet side of the heat pump. The component is attached via screwed fastening frames.
Order reference: DMK 800-1
Circumferential rubber gasket for vibration-free connection of the air duct to the air intake and air outlet side of the heat pump. The component is attached via a screwed fastening frame (packaging unit 1).
Order reference: DMK 800
Circumferential rubber gasket for vibration-free connection of the air duct to the air intake and air outlet side of the heat pump. The component is attached via screwed fastening frames.
Order reference: DMK 900-1
Circumferential rubber gasket for vibration-free connection of the air duct to the air intake and air outlet side of the heat pump. The component is attached via a screwed fastening frame (packaging unit 1).
Order reference: LUS 11
Air circuit for internally installed air-to-water heat pumps for use in rooms with low temperatures and low humidity. The set contains a 5 m length of thermally-insulated and sound-insulated air hose which can be used for both the air intake and the air outlet side. The air intake and air outlet can be led through a light well or wall opening which must be constructed and insulated on site. Mounting plates ( two of each) for the heat pump and the wall opening as well as all the required installation materials are included in the scope of supply.
Order reference: LUS 16
Air circuit for internally installed air-to-water heat pumps for use in rooms with low temperatures and low humidity. The set contains a 5 m length of thermally-insulated and sound-insulated air hose which can be used for both the air intake and the air outlet side. The air intake and air outlet can be led through a light well or wall opening which must be constructed and insulated on site. Mounting plates ( two of each) for the heat pump and the wall opening as well as all the required installation materials are included in the scope of supply.
Order reference: RSG 500
Specially developed rain guard for protection from driving rain, for air-to-water heat pumps with low pressure loss of approx. 5 Pa ; the permissible overall pressure loss is not exceeded when standardly integrated with the air hose set and/or air ducts; aluminium frame (width 25 mm) for wall mounting; painted grey-white (RAL 9002).
Order reference: RSG 600
Specially developed rain guard for protection from driving rain, for air-to-water heat pumps with low pressure loss of approx. 5 Pa ; the permissible overall pressure loss is not exceeded when standardly integrated with the air hose set and/or air ducts; aluminium frame (width 25 mm) for wall mounting; painted grey-white (RAL 9002).
Order reference: RSG 700
Specially developed rain guard for protection from driving rain, for air-to-water heat pumps with low pressure loss of approx. 5 Pa ; the permissible overall pressure loss is not exceeded when standardly integrated with the air hose set and/or air ducts; aluminium frame (width 25 mm) for wall mounting; painted grey-white (RAL 9002).
Order reference: RSG 800
Specially developed rain guard for protection from driving rain, for air-to-water heat pumps with low pressure loss of approx. 5 Pa ; the permissible overall pressure loss is not exceeded when standardly integrated with the air hose set and/or air ducts; aluminium frame (width 25 mm) for wall mounting; painted grey-white (RAL 9002).
Order reference: RSG 900
Specially developed rain guard for protection from driving rain, for air-to-water heat pumps with low pressure loss of approx. 5 Pa ; the permissible overall pressure loss is not exceeded when standardly integrated with the air hose set and/or air ducts; aluminium frame (width 25 mm) for wall mounting; painted grey-white (RAL 9002).
Order reference: RSG 1500
Specially developed rain guard for protection from driving rain, for air-to-water heat pumps with low pressure loss of approx. 5 Pa ; the permissible overall pressure loss is not exceeded when standardly integrated with the air hose set and/or air ducts; aluminium frame (width 25 mm) for wall mounting; painted grey-white (RAL 9002).
Order reference: LUH 600
Deflector hood for reducing the air outlet noise of air-to-water heat pumps installed indoors; fastening frame (included in the scope of supply) mounted for fitting the deflector hood to the external building wall (rain guard not required), casing colour: white aluminium structured (similar RAL 9006), can be painted.
Order reference: LUH 700
Deflector hood for reducing the air outlet noise of air-to-water heat pumps installed indoors; fastening frame (included in the scope of supply) mounted for fitting the deflector hood to the external building wall (rain guard not required), casing colour: white aluminium structured (similar RAL 9006), can be painted.
Order reference: LUH 800
Deflector hood for reducing the air outlet noise of air-to-water heat pumps installed indoors; fastening frame (included in the scope of supply) mounted for fitting the deflector hood to the external building wall (rain guard not required), casing colour: white aluminium structured (similar RAL 9006), can be painted.
Order reference: SYL 250
For solid-borne sound insulation of heat pumps for indoor installation and compensation of floor unevenness; strip-shaped support for the base frame; 12 mm thick (deformation approx. 1 mm); max. load 140 kg/RM; 2.5 m long (can be cut to appropriate length), colour green.
Order reference: SAS 100
Hydraulic connection set to facilitate installation of air-to-water heat pumps. Consisting of:
Order reference: SAS 110
Hydraulic connection set to facilitate installation of air-to-water heat pumps. Consisting of:
Print
Up