Press Sitemap

Dimplex / Products / Heat pumps / Brine-to-Water / Heating and cooling

SI 130TUR+

Reversible brine-to-water heat pump for indoor installation.

SI 130TUR+
SI 130TUR+

Heat pump for heating and cooling with integrated regulation installed indoors. Variable connection options for brine and heating connections on the back board of the casing. Access for service work from the front, no minimum clearance required on the sides, accessible from underneath with a lift truck. A sound-optimised metal casing and the integrated solid-borne sound insulation with free-swinging compressor base plate make direct connection with the heating system possible. High coefficients of performance (COP) thanks to compliance with EN 14511 for larger volume flows on the heat consumption side. Optimised heating and cooling operation via an external four-way reversing valve which is activated by the controller (special accessory). Reversible refrigeration circuit with additional heat exchanger for higher domestic hot water temperatures in heating operation and waste heat recovery in cooling operation. Sensor monitoring of the refrigeration circuit for a high degree of operational safety and integrated thermal energy metering (display of the calculated quantity of thermal energy for heating, domestic hot water and swimming pool water preparation). The control panel is integrated in a design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD). Universal design with flexible expansion options for:

  • Bivalent or bivalent-renewable operating mode
  • Combined distribution systems for heating and cooling
  • Unmixed and mixed heating and cooling circuit
  • Combination of active and passive cooling (special accessory)
Silent cooling via panel heating/cooling systems requires the use of the room climate station (special accessory) to regulate the flow temperature on the basis of the air temperature and humidity of a reference room. Soft starter, load contactor for brine circulating pump, integrated flow and return sensor; external sensor (standard NTC-2) and dirt filter for brine circuit included in the scope of supply. Brine package SZB must be ordered separately.

Technical data

Reversible brine-to-water heat pump for indoor installation.
Order reference SI 130TUR+
Heat pump code6002
Casing colourWhite (similar to RAL 9003)
Max. flow temperature58 °C
Flow temperature cooling max.20 °C
Lower operating limit heat source (heating operation) / Upper operating limit heat source (heating operation)-5 to 25 °C
Lower operating limit heat source (cooling operation) / Upper operating limit heat source (cooling operation)10 to 30 °C
Standard temperature spread heating EN 145115 K
Heat output B0/W35 / COP B0/W35*57,6 kW / 4,4
Heat output max. B0/W35 / COP B0/W35108,5 kW / 4,21
Heat output B0/W55 / COP B0/W5551,8 kW / 2,83
Heat output max. B0/W55 / COP B0/W55103,1 kW / 2,82
Standard temperature spread cooling EN 145115 K
Cooling capacity 1 compressor / EER B20/W763,4 kW / 5,8
Cooling capacity B20/W9 / EER B20/W9 (2 compressors)129,0 kW / 5,6
Cooling capacity B20/W18 / EER B20/W1889,4 kW / 7,4
Cooling capacity 2 compressor / EER B20/W18 (2 compressors)168,2 kW / 6,7
Nominal power consumption according to EN 14511 at B0/W3525,83 kW
Sound power level76 dB (A)
Refrigerant / Amount of refrigerantR410A / 16,9 kg
Heat source flow (min.)24,5 m³/h
Max. heating water flow rate / Pressure drop19,0 m³/h / 13000 Pa
Dimensions (W x H x D)**1350 x 1890 x 775 mm
Weight830 kg
Rated voltage3/N/PE ~400 V, 50 Hz
Starting current108 A
Fuse protection***C 80 A
Connection heating3 inch
Heat source connection3 inch

*Heating, cooling capacity and coefficients of performance (COP/EER) according to EN 14511

**Please note that additional space is required for pipe connections, operation and maintenance.

***Die Absicherung ist als allpolige Trennvorrichtung auszuführen (gemeinsame Abschaltung aller Phasen)!

Documents and downloads

Data sheetProduct data sheet with system accessories» via e-mail
Instruction for useInstruction for use» via e-mail
Operating instructions for users for the heat pump managerOperating instructions for users for the heat pump manager» via e-mail
Operating instructions for installers for the heat pump managerOperating instructions for installers for the heat pump manager» via e-mail
Equipment dataEquipment data» via e-mail
Declaration of conformityDeclaration of conformity» via e-mail
» Login