Dimplex / Products / Heat pumps / Heat pump module
|
LI 2M |
A heat pump module for utilisation of waste heat; integrated radial fan, exhaust air and extract air stubs for optional connection of a duct system DN 160 (maximum pipe length 10 m), infinitely variable return set temperature. The generated heat output is transferred via an integrated stainless steel heat exchanger (external circulating pump required). The cooled air can be blown out into the installation room or guided outside via ducts. Heat output approx. 2 kW, with an exhaust air temperature of 25 °C and a heating water outlet temperature of 35 °C.
Information on leak tests and refrigerant quantities can be found here.
| Heat pump module (Medium temperature) | ||
|---|---|---|
| Order reference | LI 2M | |
| Casing colour | White | |
| Max. flow temperature | 65 °C | |
| Lower operating limit heat source (heating operation) / Upper operating limit heat source (heating operation) | 0 to 40 °C | |
| Heat output with 1 compressor / COP A35/W45* | 2,3 kW / 3,0 | |
| Heat output with 1 compressor / COP A20/W45* | 1,7 kW / 2,5 | |
| Sound pressure level in 1 m (indoors) | 51 dB (A) | |
| Refrigerant / Amount of refrigerant | R134a / 0,26 kg | |
| Heat source flow (min.) | 450 m³/h | |
| Dimensions (W x H x D)** | 450 x 725 x 550 mm | |
| Weight | 54 kg | |
| Connection voltage | 1/N/PE ~230 V, 50 Hz | |
| Fuse protection | C 16 A | |
| Connection heating | ½ inch | |
**Please note that additional space is required for pipe connections, operation and maintenance.
Product data sheet with system accessories: 
as PDF 
by e-mail
Instruction for use: as PDF
Operating limits diagram: as PDF
Declaration of conformity: as PDF
Print
Up