Dimplex / Products / Heat pumps / Special accessories
The control line is essential for the operation of air-to-water heat pumps for outdoor installation. The control line must laid separately from the mains cable. It is not permissible for the customer to extend the control line.
Order reference: EVL 996-1
Coded connecting cable between the heat pump manager (heating controller) and an air-to-water heat pump installed outdoors. Wired ready for use with non-confusable plug connections (ductwork at least 70 mm).
Order reference: EVL 997-1
Coded connecting cable between the heat pump manager (heating controller) and an air-to-water heat pump installed outdoors. Wired ready for use with non-confusable plug connections (ductwork at least 70 mm).
Order reference: EVL 998-1
Coded connecting cable between the heat pump manager (heating controller) and an air-to-water heat pump installed outdoors. Wired ready for use with non-confusable plug connections (ductwork at least 70 mm).
Order reference: EVL 999-1
Coded connecting cable between the heat pump manager (heating controller) and an air-to-water heat pump installed outdoors. Wired ready for use with non-confusable plug connections (ductwork at least 70 mm).
Order reference: SMF 25
Dirt trap for installation into the heating circuit, mesh size 0.6 mm, suitable for all non-corrosive substances up to 150 °C. Pipework is kept free from hazardous impurities, the heat pump evaporator is protected against damage and the service life is raised for regulating devices and valves.
Order reference: SMF 32
Dirt trap for installation into the heating circuit, mesh size 0.6 mm, suitable for all non-corrosive substances up to 150 °C. Pipework is kept free from hazardous impurities, the heat pump evaporator is protected against damage and the service life is raised for regulating devices and valves.
Order reference: AS 976
Flexible, compression-proof hose for connecting the heat pump to the heating system, max. permissible temperature 80 °C, length 10 m, can be cut to length, without insulation.
Order reference: AS 976-1
Flexible, compression-proof hose for connecting the heat pump to the heating system, max. permissible temperature 80 °C, length 10 m, can be cut to length, without insulation.
Order reference: SCHT 975-1
Hose nozzle with external thread and hose clip for connecting hose (for connection to the heating system e.g. compact manifold).
Order reference: SCHT 975-3
Hose nozzle with external thread and hose clip for connecting hose (for connection to the heating system e.g. compact manifold).
Order reference: SCHT 975-4
Hose nozzle with external thread and hose clip for connecting hose (for connection to the heating system e.g. compact manifold).
Order reference: TUE 430
Nozzle with cap nut (internal thread) for connecting hose (for connection to heat pump).
Order reference: TUE 440
Nozzle with cap nut (internal thread) for connecting hose (for connection to heat pump).
Print
Up