Press Trade Fair Newsletter Sitemap Search:

Dimplex / Products / Heat pumps / Brine-to-Water / Compact for quick and easy installation

SIK 7TE

Brine-to-water heat pump in a compact design

SIK 7TE
SIK 7TE
  • Installation location: Indoors

Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into a brown-red design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD). Integrated brine components enable direct connection of the heat source:

  • Brine circulating pump (observe the free compression)
  • Expansion vessel (8 l)
  • Safety valve and pressure gauge
Sound-optimised through insulated metal casing and double vibration-isolated compressor. Integrated solid-borne sound insulation for direct connection to the heating system. Economiser for high coefficients of performance (COP). Compact design with optional domestic hot water preparation and integrated components for direct connection of an unmixed heating circuit (must not be used for bivalent systems):
  • Circulating pump (observe the free compression)
  • Overflow valve and safety module
  • Expansion vessel (24 l)
Soft starter (from SI(K) 9 upwards), integrated flow and return sensors; external sensor (standard NTC-2), dirt filter and large-capacity breather (1½") with micro air bubble deposition for brine circuit included in the scope of supply. Dirt trap for installation in the brine circuit (return to the heat pump) included in the scope of supply.

Information on leak tests and refrigerant quantities can be found here.

Technical data

Brine-to-water heat pump in a compact design (Low temperature)
Order reference SIK 7TE
Heat pump code4001
Casing colourWhite (similar to RAL 9003)
Max. flow temperature58 °C
Lower operating limit heat source (heating operation) / Upper operating limit heat source (heating operation)-5 to 25 °C
Heat output B0/W35 / COP B0/W35*6,80 kW / 4,30
Heat output B0/W45 / COP B0/W456,60 kW / 3,10
Nominal power consumption according to EN 14511 at B0/W351,58 kW
Sound power level device51 dB (A)
Refrigerant / Amount of refrigerantR407C / 1,5 kg
Max. heating water flow rate / Pressure drop1,2 m³/h / 11600 Pa
Heat source flow (min.)1,2 m³/h
Dimensions (W x H x D)**650 x 1115 x 680 mm
Weight179 kg
Rated voltage3/N/PE ~400 V, 50 Hz
Starting current with soft starter30 A
Fuse protection***C 16 A
Connection heating1 ¼ inch
Heat source connection1 ¼ inch

*Heat output and COP according to EN 14511

**Please note that additional space is required for pipe connections, operation and maintenance.

***Die Absicherung ist als allpolige Trennvorrichtung auszuführen (gemeinsame Abschaltung aller Phasen)!

Documents and downloads

Data sheetProduct data sheet with system accessories» via e-mail
Instruction for useInstruction for use» via e-mail
Product informationProduct information» via e-mail
Equipment dataEquipment data» via e-mail
Declaration of conformityDeclaration of conformity» via e-mail
» Login